High-performance anti-corrosion fan

Corrosion fan is to rely on the input of mechanical energy, increase the gas pressure of the gas feed side machine, which is a slave fluid machine, as compared with ordinary fans prevent corrosion. Is designed for the chemical and corrosion of ordinary steel have a greater input of toxic gas equipment design and manufacturing, to achieve the anti-corrosion fan ventilation in the same time, greatly extended service life.
Corrosion fan features:
 1, the fan inlet side must be installed set of wind, a hope that means protective wires.
 2, corrosion fan installation should pay attention to check the connection portion loose leaves and duct clearance should be uniform, not touching.
 3, connected to the outlet pipe weight should not be made with the fan duct, the installation should additional support.
4, anti-corrosion axial fan should be carefully checked before installation whether fans packing and shipping damage due to deformation, if damaged, to be repaired properly before proceeding to the installation, explosion shook his head fans, explosion-proof ceiling fans, explosion-proof exhaust fan wall fan shook his head, explosion-proof FRP axial fan
5, anti-corrosion axial fan fan base must naturally engage the ground plane can not be beat base mandatory connection to prevent deformation of the base, the school should be installed under the base, plus horn pieces, keeping the horizontal position, then tighten the ground.
 Corrosion fan widely used in factories, mine ventilation, tunnels, cooling towers, vehicles, ships and buildings, dust emission and cooling; boiler and industrial furnace ventilation and the wind; air-conditioning equipment and household appliances and cooling equipment ventilation; grain drying and sending; wind tunnel source and hovercraft inflation and propulsion.

http://www.lxrfan.com/products_info/High-Capacity-Double-Suction-Fans-for-Power-Plant-330162.html